Building Automation & BMS HMI Touch Panels
— OEM/ODM building automation HMI touch panels for BMS, HVAC, lighting and room control. Open Android/Linux, PoE, RS485 and KNX-ready platforms for professional automation projects.
Building Automation HMI for Commercial Buildings
SMATEK provides customizable touch panel platforms for building automation and Building Management System (BMS) applications.
The panels can serve as room-level control interfaces, local visualization terminals or operator HMIs within a larger building automation architecture.
Typical building functions include:
- HVAC and climate control
Lighting management
Shading control
Energy monitoring
Room and zone control
Building status visualization
Scheduling and automation
SMATEK works with building automation companies, BMS integrators, system integrators and OEM product teams that need a customizable hardware platform for their own automation software and system architecture.
HVAC, Lighting & Energy Management
Building automation brings multiple building systems together to improve comfort, operational efficiency and energy usage.
HVAC & Climate Control
The touch panel can provide an interface for:
- Temperature adjustment
Heating and cooling
Fan speed
HVAC operating modes
Fan coil unit (FCU) control
Zone-based climate control
Lighting & Shading
Typical functions include:
- Lighting control
Dimming
Lighting scenes
Motorized blinds
Shading control
Scheduled operation
Energy Management
The HMI can also visualize:
- Energy consumption
Equipment status
Room conditions
Occupancy information
Energy-saving modes
Automation schedules
The underlying control logic can remain within the customer’s BMS or building automation platform.
Building Automation Integration
A building automation project may combine room controllers, HVAC equipment, lighting systems, sensors and centralized BMS software.
SMATEK provides the HMI hardware layer within this architecture.
A typical configuration can be:
Touch Panel → Room Controller / Gateway → Building Systems → BMS
Depending on the project, communication may use technologies such as:
- Ethernet
PoE
RS485
KNX
Wi-Fi
Other customer-defined interfaces
For KNX-based projects, the panel can function as a room control or visualization interface through the customer’s selected KNX interface, gateway and software architecture.
This allows the existing automation platform to remain at the center of the system while the touch panel provides the user interface.
Open Platform for Building Automation Software
Building automation companies often have their own software, visualization system or cloud platform.
SMATEK’s open Android/Linux platforms allow customers to deploy their own applications instead of relying on a proprietary HMI ecosystem.
Depending on the project, support can include:
- Customer application deployment
Custom UI/HMI
Firmware configuration
Application auto-start
Kiosk Mode
Custom launcher
ADB/developer access
System-level configuration
The customer retains control of the application, HMI design and automation logic, while SMATEK provides the underlying hardware platform.
Building Automation Applications
SMATEK panels can be adapted to different commercial and institutional environments.
Commercial Buildings
For offices, mixed-use buildings and commercial facilities:
- Room control
HVAC interfaces
Lighting management
Building visualization
Energy monitoring
Retail & Shopping Facilities
For stores and larger retail environments:
- Store lighting
HVAC
Display lighting
Shading
Scheduled operation
Education & Campuses
For classrooms and shared facilities:
- Lighting control
HVAC
Shading
Energy management
Scheduled operation
Gyms & Wellness Facilities
For spaces with different operating modes:
- Opening / closing scenes
HVAC control
Lighting
Temperature and humidity monitoring
Facility status
Building Automation HMI for New Construction & Retrofit
SMATEK panels can be incorporated into both new building projects and retrofit applications.
New Construction
The HMI hardware can be specified according to the project’s BMS, room control, network and installation requirements.
Building Retrofit
For existing buildings, the panel can act as a new user interface while communicating with the existing automation infrastructure through the appropriate controller or gateway.
This provides a practical way to modernize the user interface without necessarily replacing the complete building automation system.
OEM/ODM Building Automation Touch Panels
Different building automation projects may require different hardware configurations and installation methods.
SMATEK can customize:
- Hardware
Display size and resolution
Processor
RAM and storage
PoE and Ethernet
RS485 / UART
GPIO and other I/O
Relay interfaces
Wireless connectivity
Custom PCB
Enclosure and mounting - Software & Firmware
Android/Linux configuration
Firmware customization
Customer application deployment
Custom launcher
Kiosk Mode
Auto-start application
UI/HMI customization
System-level configuration
From engineering samples and prototype development to pilot production and mass production, SMATEK provides the hardware development and manufacturing support required for commercial deployment.
Built for Building Automation Integrators & OEMs
SMATEK works with companies that already have their own:
- BMS platform
Building automation software
HVAC control system
Lighting control system
KNX solution
Cloud platform
Automation logic
Rather than replacing the customer’s existing technology stack, SMATEK provides a customizable HMI hardware platform around the project’s requirements.
Typical customers include:
BMS Integrators · Building Automation Companies · System Integrators · OEM Brands · Solution Providers · PropTech Companies
From Building Automation Concept to Production
SMATEK supports the hardware lifecycle from:
Specification → Prototype → Engineering → Integration → Testing → Pilot Production → Mass Production
Customers can develop and maintain their own building automation software while SMATEK provides the customizable touch panel hardware, firmware support and manufacturing capability.
Frequently Asked Questions
What is a building automation HMI?
A building automation HMI is a user interface used to monitor and control building systems such as HVAC, lighting, shading and energy management.
Can the panel integrate with a BMS?
Yes. SMATEK panels can be integrated into BMS architectures through the customer’s application, gateway and supported communication interfaces.
Can SMATEK provide PoE touch panels for building automation?
Yes. PoE is available on selected platforms and can simplify network and power installation for wall-mounted automation interfaces.
Can the panel run our own software?
Yes. Supported Android/Linux platforms allow customers to deploy their own applications and HMI software.
Can SMATEK customize the hardware?
Yes. Depending on project requirements, SMATEK can customize the PCB, interfaces, memory, enclosure and other hardware elements.
Develop Your Building Automation HMI with SMATEK
Looking for a customizable touch panel for a BMS, building automation or room control project?
Share your requirements for display size, operating system, connectivity, installation method and software deployment.
SMATEK provides OEM/ODM building automation HMI platforms from prototype development to mass production.
Talk to SMATEK about your building automation project.
Related: